Recent Publications of Dr. Kalpana S. Katti group

Books and Book Chapters

 

  • Materials Research Society Symposium Proceedings Vol 844. Edited with C. Viney, C. Hellmich and F. Ulm

 

  • Chapter on “Characterizing Biointerfaces and Biosurfaces in Biomaterials Design” In Press: in  ‘Nanoscience and Its Applications in Biomedicine’ by Springer.

 

  • Chapter on “Materials and engineering of joint replacement” To appear in Recent developments in joint replacement technology by Woodhead Publishers

Journal Papers

  1. P. Ghosh, D. R. Katti, K. S. Katti, (2008), Mineral and Protein-Bound Water and Latching Action Control Mechanical Behavior at Protein-Mineral Interfaces in Biological Nanocomposites to appear in  Journal of Nanomaterials

 

  1. R. Bhowmik, K. S. . Katti, D. R. Katti, (2008), Influence of Mineral on the Load Deformation Behavior of Polymer in Hydroxyapatite- Polyacrylic Acid Nanocomposite Biomaterials: A Steered Molecular Dynamics Study, Journal of Nanoscience and Nanotechnology..Vol 8, No 4, 2075-2084.

 

3.      D. Sikdar, K. S. Katti, D. R. Katti, (2008), Molecular Interactions Alter Clay and Polymer Structure in Polymer Clay Nanocomposites, Journal of Nanoscience and Nanotechnology. Vol 8, No.4, 1638-1657

 

4.      D. Verma, K.S. Katti, D.R. Katti, (2008), Effect of Biopolymers on Structure of Hydroxyapatite and Interfacial Interactions in Biomimetically Synthesized Hydroxyapatite/Biopolymer Nanocomposites, Annals of Biomedical Engineering Vol. 36, No. 6, 1024–1032

 

5.      D. Sikdar, S.  Pradhan, D. R. Katti, K. S. Katti, B. Mohanty, (2008), Altered Phase Model for Polymer Clay Nanocomposites, to appear in Langmuir.

 

6.      B. Mohanty, K. S. Katti, D. R. Katti, (2008), Experimental Investigation of Nanomechanics of the Mineral-Protein Interface in Nacre,  Mechanics Research Communications.35, 17-23.

 

7.      D. Verma, R. Dash, K. S. Katti, D. Schulz, A.N. Caruso, (2008), Role Of Coordinated Metal Ions On The Orientation Of Phthalocyanine Based Coatings. In press  Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy

 

8.      D. Sikdar, K. S. Katti, D. R. Katti, (2008), The Role of Interfacial Interactions on the Crystallinity and Nano-mechanical Properties of Clay Polymer Nanocomposites: A Molecular Dynamics Study, J. Appl. Pol. Sci. 107, 3137-3148.

 

 

9.      D. Verma, K.S.Katti, D.R. Katti, B. Mohanty, (2008), Mechanical Response and Multilevel Structure of Biomimetic Hydroxyapatite/ Polygalacturonic /Chitosan Nanocomposites,  Materials Science and Engineering C. 28 , 399–405.

 

10.  R. Bhowmik, K. S. Katti, D. R. Katti, (2007), Mechanics of Molecular Collagen is Influenced by Hydroxyapatite in Natural Bone, J. Mater. Sci.  42, 8795–8803.

11.  D. Sikdar, D. R. Katti, K. S. Katti, , and B. Mohanty, (2007), Effect of Organic Modifiers on Dynamic and Static Nanomechanical Properties and Crystallinity of Intercalated Clay-Polycaprolactam Nanocomposites, Journal of Applied Polymer Science. 105, 790-802.

12.  Katti, D.R., Schmidt, S., Ghosh, P., and Katti, K.S ., (2007), Steered Molecular Dynamics Simulations of Dry and Hydrated Sodium Montmorillonite Interlayer, Canadian Geotechnical Journal. 44, 425-435.

 

13.  P. Ghosh, D. R. Katti, K. S. Katti, (2007), Mineral proximity influences mechanical response of proteins in biological mineral-protein hybrid system, Biomacromolecules, 8, 851-856.

 

14.  R. Bhowmik, K.S. Katti, and D.R. Katti, (2007) Molecular Modeling of polyacrylic acid- hydroxyapatite interface,  Polymer, 48, 664-674.

 

15.  R. Bhowmik K.S. Katti, D. Verma and D.R. Katti, (2007), Probing Molecular Interactions in Bone Biomaterials: Through Molecular Dynamics and Fourier Transform Infrared Spectroscopy”, Mater. Sci. Eng C 27(3), 352-371.

 

16.  D. Verma, K. S. Katti, D. R. Katti, (2007), Nature of water in Nacre: a 2D FTIR spectroscopic study,  Spectrochimica Acta Part A 67 (2007) 784–788.

17.  Sikdar, D., Katti, D. R., and Katti, K. S., (2006), Molecular Model for -caprolactam Based Intercalated Polymer Clay Nanocomposite: Integrating Modeling and Experiments,  Langmuir, 22, 7738-7747.

18.  P. Ghosh, D. R. Katti, K. S. Katti, (2006), Impact of  -sheet conformations on the mechanical response of protein in biocomposites, Materials and Manufacturing Processes, 21, 676-682.

19.  K. S. Katti, Phanikumar Turlapati, Devendra Verma, Praveen Kumar Gujjula, Dinesh R. Katti, (2006) “Static and dynamic mechanical behavior of hydroxyapatite-polyacrylic acid composites under simulated body fluid”,  American Journal of Biochemistry and Biotechnology, 2 (2), 73-79.

20.  Sikdar, Debashis; Katti, Dinesh R.; Katti, Kalpana S.; and Bhowmik, Rahul, (2006), Insight into molecular interactions between constituents in polymer clay nanocomposites, Polymer, 47, 5196-5205.

 

21.  B. Mohanty, K. S. Katti, D. R. Katti, (2006), “Dynamic nanomechanical properties of nacre”, Journal of Materials Research, 21, 2045-2051.

 

22.  D. Verma, K. S. Katti, D. R. Katti, (2006), Bioactivity in Insitu Polycaprolactone-Hydroxyapatite composites”, Journal of Biomedical Materials Research78A, 772-780.

 

23.  K. S. Katti, B. Mohanty and D. R. Katti, (2006), Nanomechanical properties of nacre, Journal of Materials Research, 21,1237-1242.

 

24.  K. S. Katti, D. Sikdar, D. R. Katti, P. Ghosh, D. Verma, (2006) Molecular Interactions In Intercalated Organically Modified Clay In Clay-Polycaprolactam Nanocomposites: Experiments And Modeling, Polymer, 47, 403-414

 

  1. K.S. Katti and D. R. Katti, (2006), Silica-Water Interactions In Montmorillonite Using  Fourier Transform Infrared Spectroscopy: Relationship To Swelling And Swelling Pressure, Langmuir, 22, 532-537

 

26.  D. Verma, K. S. Katti, D. R. Katti, (2006), Photoacoustic FTIR Spectroscopic Study of Undisturbed Nacre from Red Abalone, Spectrochimica Acta, 64(4),  1051-1057

 

27.  D. Verma, K. S. Katti, D. R. Katti,  (2006), Molecular Interactions in Hydroxyapatite/Polyacrylic Acid /Polycaprolactone Composites: A Photoacoustic FTIR Spectroscopy Study, Journal of Biomedical Materials Research A, 77, 59-66.

 

28.  K. S. Katti and D. R. Katti, (2006), Why is Nacre so strong and tough? Invited paper: Materials Science and Engineering C, 26, (8), 1317-1324.

 

  1. Schmidt, S., Katti, D., Ghosh, P., and Katti, K., (2005), Evolution of Mechanical Response of Sodium Montmorillonite Interlayer with Increasing Hydration, Langmuir, 21, August, 8069-8076.

 

  1. Katti, D.R., Schmidt, S., Ghosh, P., and Katti, K.S., (2005), Modeling Response of Pyrophyllite Clay Interlayer to Applied Stress Using Steered Molecular Dynamics, Clays and Clay Minerals, v52,n2, 171-178.

 

  1. D.R. Katti, P. Ghosh, S. Schmidt and K.S. Katti, (2005) Mechanical properties of sodium montmorillonite interlayer intercalated with amino acids, Biomacromolecules, 6, 3276-3282.

 

32.  K.S. Katti, D.R. Katti, J. Tang and M. Sarikaya, Modeling Mechanical Responses In A Laminated Biocomposite, Part II, Nonlinear Responses And Nuances Of Nanostructure, Journal of Materials Science 40, pp 1749-1755 (2005).

 

33.  Katti, D.R., Schmidt, S., Ghosh, P., and Katti, K.S., (2005) Modeling Response of Pyrophyllite Clay Interlayer to Applied Stress Using Steered Molecular Dynamics, Clays and Clay Minerals. v52,n2, 171-178.

 

34.  K.S. Katti, D.R. Katti, S. M. Pradhan, A. P. Bhosle, (2005), Platelet interlocks are the key to toughness and strength in nacre, Journal of Materials Research 20 (5) 1097-1100.

35.  K. S. Katti, (2004), Biomaterials in total hip replacement, Colloids and Interfaces B. Invited paper. 39, 133-142.

 

36.  Katti, D. R., Pradhan, S. and Katti, K. S., (2004), Modeling The Organic-Inorganic Interfacial Nanoasperities In A Model Bio-Nanocomposite, Nacre, Reviews on Advanced Materials Science 6 pp. 162-168.

 

37.  K. S. Katti and M. W. Urban, (2003),Conductivity model and photoacoustic FT-IR surface depth profiling of heterogeneous polymers, Polymer 44(11)  pp. 3319-3325, (2003)

 

38.  K.S. Katti, M. Qian, F. Dogan,  and  M. Sarikaya, (2002), Dopant Effect on Local Dielectric Properties in Barium Titanate-Based Electroceramics Determined by Transmission EELS”, J. Am. Ceram. Soc., 85[9], 2236-43.

39.  D.R. Katti, K.S. Katti, J. Sopp, and M. Sarikaya, (2001), 3D Finite Element Modeling of Mechanical Response in Nacre-Based Hybrid Nanocomposites, J. Theo. Comp. Poly. Sci. 11 (5), pp. 397-404.

40.  D.R. Katti, and K.S. Katti, (2001), Modeling Microarchitecture and Mechanical Behavior of Nacre Using 3D Finite Element Techniques, Part I: Elastic Properties, J. Mater. Sci., 36(6), 1411-1417.

41.  K.S. Katti, and M.W. Urban, (2000), Effect of Carbon black on adhesion to plastics in solventborne 2K Polyurethanes, J. Coat. Technology, 72[903], (2000) (Paper winner of Roon Award)

42.  K.S. Katti, M. Qian, D.W. Frech, and  M. Sarikaya, (1999), Electron Energy Loss Spectroscopy and Dielectric Function of Biological and Geological Polymorphs of CaCO3, Microscopy and Microanalysis, 5 [5],

 

43.  K.S. Katti, M. Qian, M. Sarikaya, and M. Miyayama, (1997), Determination of local high frequency dielectric function during the cubic-tetragonal phase transformation in barium titanate, J.  Mater. Res. 12, [6].

44.  K.S. Katti, and S.H. Risbud, (1992), Quantum Structural Parameters for Electron and Hole carrying Superconductors. Physical Review B, 45 [17].

 

Peer Reviewed Conference Papers

 

·         K. Katti, D. R. Katti, A. P. Bhosle, S. Pradhan, (2005) Experimental Studies on deformation in Nacre. Proc. Of Microscopy Society of America. 2005 annual meeting of microscopy and Microanalysis Hawaii.

·         Katti, D.R., Katti, K.S., Ghosh, P. and Schmidt, S., (2004), Exploring Mineral Biopolymer Interactions to Model Mechanical Response of Interfaces in Bio-Nanocomposite, Nacre, Proc. 6th World Congress on Computational Mechanics, Beijing, China, (Keynote Lecture).

·         D. Verma, K. S. Katti, B. Mohanty, “Mechanical Properties of Biomimetic Composites for Bone Tissue Engineering” Proc. Materials Research Society Vol 844. (2005)

·         D. R. Katti, P. Ghosh, K. S. Katti, “Evaluation of Deformation Mechanisms at Mineral-Protein Composite Interface Using Steered Molecular Dynamics Simulations”, Proc. Materials Research Society Vol 844. Fall 2004 meeting(2005)

·         D. R. Katti, K. S. Katti, Computational Mechanics Routes to Explore the Origin of Mechanical Properties in a Biological Nanocomposite: Nacre, Proc. Materials Research Society Vol 844. Fall 2004 meeting (2005)

·         R. Bhowmik, K. S. Katti, D. R. Katti, “Effect of Molecular Interactions at Polymer-Mineral Interfaces on Mechanical Response”, Proc. Materials Research Society Vol 844. 194-200, (2005)

·         P. Ghosh, D. R. Katti, K. S. Katti, “Influence of Protein Structures on Mechanical Response”, Proc. Materials Research Society Vol 844. Fall 2004 meeting (2005).

·         K.S. Katti, P. Turlapati and R. Bhowmik, Control of Polymer-Mineral Interfacial Behavior in Poly(Acrylic Acid)-Hydroxyapatite Nanocomposites for Bone Replacement , Proc. ASCE Engineering Mechanics Conference, 2003

·          K.S. Katti, A. Bhosle, and D.R. Katti, Experimental Studies In The Failure Mechanisms Of A Model Bio-Nanocomposite-Nacre, Proc. ASCE Engineering Mechanics Conference, 2003

·          K.S. Katti and D.R. Katti, Effect of Clay-Water Interactions on Swelling in Montmorillonite Clay,  Proc. ASCE Engineering Mechanics Conference, 2003

·          D.R. Katti, S. Schmidt, P. Ghosh and K.S. Katti, Molecular Modeling of Pyrophyllite Clay and Modeling Response to Applied Stress Using Molecular Dynamics, Proc. ASCE Engineering Mechanics Conference, 2003

·         D.R. Katti, S.M. Pradhan and K.S. Katti , Role Of Nanoscale Asperities In Hybrid Bio-Nanocomposites : A Multiscale Modeling Approach, Proc. ASCE Engineering Mechanics Conference, Seattle, WA, 2003

·          K.S. Katti, P. Gujjula, Control Of Mechanical Responses In Insitu Polymer-Hydroxyapatite  Composites For Bone Replacement, 15th ASCE Engineering Mechanics Conference Proceedings, Columbia University, NY, NY.2002.

·          D. R. Katti, K. S. Katti, J. Tang, M. Sarikaya, Effect of Nanostructure in nacre: A multiscale modeling approach, 15th ASCE Engineering Mechanics Conference Proceedings, Columbia University, NY, NY. 2002.

·         M.Sarikaya, H.Fong, J. M. Sopp, K. S. Katti, and G. Mayer, Biomimetics: Nanomechanical Design of Materials Through Biology, 15th ASCE Engineering Mechanics Conference Proceedings, Columbia University, NY, NY.2002.

·          K. S. Katti, P. Gujjula, A. Ayyarsamy, T. Arens, In-Situ Mineralization Of Hydroxyapatite For A Molecular Control Of Mechanical Responses In Hydroxyapatite-Polymer Composites For Bone Replacement.  Materials Research Society Symposium - Proceedings, 711, Pages 219-224, 2002

·          D.R. Katti, K.S. Katti, and V. Shanmugasundaram, Role Of Clay-Solvent Inter And Intraparticle Interactions On Swelling Characteristics Of Montmorillonite Nano-Meso-Micro Scale Particulate Systems, Materials Research Society Symposium – Proceedings, 704, Pages 257-262, 2002. 

·         D.R. Katti, K.S. Katti, J. Tang, J.M. Sopp, and M. Sarikaya, Evaluating Effects of Nanostructural Nuances on Bulk Mechanical Properties of Nacre Using 3D Finite Element Modeling, Materials Research Society Symposium - Proceedings, 677, Pages AA7.8.1-AA7.8.6, 2001.

·          K.S. Katti, and M.W. Urban,  Effect of Inclusions in polymeric coatings on quantitative depth profiling using step-scan photoacoustic spectroscopy, Polymeric Materials Science and Engineering Proceedings of annual meeting of American Chemical Society, 85. 2001.

·         K.S. Katti, D.R. Katti, J.M. Sopp, W.M. Mercer, and M. Sarikaya, “Nano-Meso_Macro Scale Response Simulation of Biomimetic Nanocomposites”, Proc. 10th. Conference – International Association for Computer Methods and Advances in Geomechanics, Tucson, 2001.

·         K. S. Katti, and M. W. Urban, Effect Of Pigments On Interfacial Behavior Of Polyurethane Coatings On Plastic Substrates, Polymeric Materials Science and Engineering Proceedings of annual meeting of American Chemical Society, 84. 2000.

·          J.M. Sopp, W.M. Mercer, H. Fong, M. Sarikaya, K.S. Katti, D.R. Katti, and M. Sarikaya, (2000) “Nanomechanical properties of a biocomposite , mollusk shell nacre,” Proc. Microscopy  Society of America,  58th Annual Meeting.

·         D.R. Katti, and K.S. Katti, Three Dimensional Finite Element Modeling of Microstructural Development of Nacre in Seashells and Implication on Mineralization of CaCO3, Materials Research Society Symposium - Proceedings. 599, Pages 231-236, 2000

·          K.S. Katti, M. Qian, D.W. Frech, and  M. Sarikaya, Electron Energy Loss Spectroscopy and Dielectric Function of Biological and Geological Polymorphs of CaCO3,Proceedings of Microscopy Society of America, MSA 56th annual meeting, 1998.

·         K. S. Katti, M. Qian, M. Sarikaya, "Determination of Local Dielectric Function in Donor Doped Barium Titanate", paper winner of Presidential award to K. S. Katti, Proc. Microscopy and Microanalysis, MSA 54th annual meeting, 1996

·         K. S. Katti, M. Qian, M. Sarikaya,  "Low Loss Transmission Electron Spectroscopic Studies in Donor Doped Barium Titanate", Electrically Based Microstructural Characterization, Materials Research Society Symposium Proceeding, 411, 191-196, 1996.

·         K. S. Katti, M. Qian, M. Sarikaya, " A Novel Technique to Study the Paraelectric to Ferroelectric Transformation in Barium Titanate using Transmission EELS", In situ Electron and Tunneling Microscopy of Dynamic Processes; Materials Research Society Symposium Proceedings, 404, 101-106, 1996.  

·          K.S. Katti, M. Qian, and M. Sarikaya, "Dynamic Behavior of Twins in Barium Titanate"  Structure and Properties of Interfaces in Ceramics: Materials Research Society Symposium Proceedings, 357, 121-126, 1995.

·         D. R. Katti and K. S. Katti, “Role of Nanostructure on Mechanical Properties of nacre,” Second MIT Conference on Computational Fluid an Solid Mechanics, June 17-20, 2003, MIT Cambridge MA 02139 USA.

·         D. R. Katti and K. S. Katti, “Nacre: An Inspiration for Novel Nanocomposite Systems”, International Conference on Fiber Reinforced Composites, Chennai India, 2003.

·         K. S. Katti, “Biomimetic Nanocomposite Biomaterials for Bone Replacement”, International Conference on Fiber Reinforced Composites, Chennai India, 2003.

·         K. S. Katti and P. Turlapati, “Mechanical Responses In Biomimetic Polymer Hydroxyapatite Nanocomposites,” Proc. Annual meeting of Society of Plastics Engineers, ANTEC 2004, Chicago, IL.

·         Katti, D.R., Ghosh, P., Schmidt S. and Katti,K.S., (2004) Characteristics Of Montmorillonite Clay Amino Acid Interfaces: Evaluation Using Molecular Dynamics Simulations, 17th ASCE Engineering Mechanics Conference Delaware.

·         Katti, D.R., Schmidt, S., Ghosh, P., and Katti,K.S., (2004) Steered Molecular Dynamics Simulations Of Hydrated Montmorillonite Interlayer, 17th ASCE Engineering Mechanics Conference, Delaware.

·         Ghosh, P., Katti, D.R., and Katti, K.S., (2004) Mechanical Response Of b-Sheet Conformations In Protein: A Steered Molecular Dynamics Study, 17th ASCE Engineering Mechanics Conference, Delaware.

·         K. S. Katti, R. Bhowmik, (2004) Force Field Parameters For Hydroxyapatite To Study Hydroxyapatite-Polymer Interactions In Nanocomposite Systems, 17th ASCE Engineering Mechanics Conference, Delaware

·         K. S. Katti, D. R. Katti, S. Pradhan, A. P. Bhosle, Influence Of Nanostructure At Organic-Inorganic Interfaces In Nacre On The Mechanical Response Of Nacre,   ICEM12- 12th International Conference on Experimental Mechanics 29 August - 2 September, 2004 Politecnico di Bari, Italy

·         Katti, D.R., Katti, K.S., Ghosh, P. and Schmidt, S., (2004), Exploring Mineral Biopolymer Interactions to Model Mechanical Response of Interfaces in Bio-Nanocomposite, Nacre, Proc. 6th World Congress on Computational Mechanics, Beijing, China, (Keynote Lecture).

·         D. Verma, K. S. Katti, B. Mohanty, “Mechanical Properties of Biomimetic Composites for Bone Tissue Engineering” Proc. Materials Research Society Vol 844. (2005)

·         D. R. Katti, P. Ghosh, K. S. Katti, “Evaluation of Deformation Mechanisms at Mineral-Protein Composite Interface Using Steered Molecular Dynamics Simulations”, Proc. Materials Research Society Vol 844. (2005)

·         D. R. Katti, K. S. Katti, Computational Mechanics Routes to Explore the Origin of Mechanical Properties in a Biological Nanocomposite: Nacre, Proc. Materials Research Society Vol 844. (2005)

·         R. Bhowmik, K. S. Katti, D. R. Katti, “Effect of Molecular Interactions at Polymer-Mineral Interfaces on Mechanical Response”, Proc. Materials Research Society Vol 844. (2005)

·         P. Ghosh, D. R. Katti, K. S. Katti, “Influence of Protein Structures on Mechanical Response”, Proc. Materials Research Society Vol 844. (2005)

·         Rahul Bhowmik, Kalpana S Katti and Dinesh R Katti;Investigating the Interfacial Interactions Between Organic and Inorganic Phases and Their Influence on the Mechanics of Organic Phase in Natural Bone. Proc. Materials Research Society Fall 2006 meeting Boston MA.

·         Bedabibhas Mohanty, Devendra Verma, Kalpana S Katti and Dinesh R Katti Time Dependent Nanomechanical Response of Nacre. At Mechanics of Biological and Bio-Inspired materials Proc. Materials Research Society Fall 2006 meeting Boston MA.

·         Dinesh R Katti, Kalpana S Katti and Pijush Ghosh Multiscale Mechanics of Nacre: From Micro Scale to Molecular. At Mechanics of Biological and Bio-Inspired materials Proc. Materials Research Society Fall 2006 meeting Boston MA.

·         Pijush Ghosh, Dinesh R Katti and Kalpana S Katti Influence of Mineral on the Deformation Mechanism of Protein in Natural Biocomposite, Nacre Proc. Materials Research Society Fall 2006 meeting Boston MA.

·         Devendra Verma, Kalpana S Katti and Dinesh R Katti Biopolymer Polyelectrolyte Complex-hydroxyapatite Composites for Bone Tissue Engineering. At Mechanics of Biological and Bio-Inspired materials Proc. Materials Research Society Fall 2006 meeting Boston MA.

·         Influence of Mineral -polymer Interactions on Molecular Mechanics of Polymer in Composite Bone Biomaterials. Rahul Bhowmik, Kalpana S Katti and Dinesh R Katti, Proc. Materials Research Society Fall 2006 meeting Boston MA.