Write a program to produce a "movie".  The movie consists of a sequence
of movements of an object.  You are to create the movements 
by creating and applying a sequence of transformation matrixs.
Each matrix is to take the object from the old location to the new location.
This requires you get the old matrix and update it with the new parts to 
the move.
That is, you are to do the transformation calculations your self.
You are to make two runs of these calculations.
The first time move the object (only one copy of the object
on the screen at a time).  The second time add copies of the object
to the image.  This second form is to be printed for hand-in.
<P>

The program 
<A HREF=cone.cc>cone.cc</A> is one example of showing multiple images
in a "movie".
The  program MotBlur.cc shows 
a way to display the full movie in one picture.
You could instead, create a separate agent for each "image" in the movie.
<A HREF=MotBlur.cc>MotBlur.cc</A> uses the SetSubFrames command with the number of subframes.
If you set it to 5, you will then need 5 calls to Render to fill the
5 SubFrames.

You need to be able to create an update a 4x4 matrix for the vtk
transformations.  The following methods are avialable in vtkActor:
<PRE>
vtkMatrix4x4& GetMatrix()
void GetMatrix(vtkMatrix4x4& result)
void SetUserMatrix(vtkMatrix4x4*)
void SetUserMatrix(vtkMatrix4x4&)
vtkMatrix4x4 *GetUserMatrix()
</PRE>

There are some other methods vtkActor has that can be of use:
<PRE>
void GetPosition(float data[3])
void SetPosition(float,float,float)
void SetOrientation(float x, float y, float z)
float *GetOrientation()
</PRE>